Catia V5 Tutorial|Automotive Engineering Design|How Create a Tyre(Easy Steps Beginners)|Part 2

Catia V5 Tutorial|Automotive Engineering Design|How Create a Tyre(Easy Steps Beginners)|Part 2


hi friends this is Mahmoud Shaquille here and in this tutorial I’m going to show you how you can design a tire in CATIA v5 using the part design and wireframe in surface design workbench so what you can see here is the completed design of the tire and I’m going to show you how you can design this from the scratch so this is the second part of the tutorial so I hope you have watched the first one so I’ll just come back to the tire study and we have then created plane on top and we’re going to give a sketch here so in here we’re going to you know make some patterns so that we can do revolve on it so before that let me just increase the thickness of the time a little bit more maybe 7 th so I’ll do get back to the sketch nine here use the profile tool and just draw profile and infant pal make these 2000 and make these two points consonant so I got one my profile over here I’ll just come out of the sketch now what I’ll do is I will come back to the wireframe and service design workbench we need to project this particular sketch into this part so we have an option called as projection here so select the project and select the along a direction option and select this particular project and this as a support and this as a direction so when I select this plane as a direction the direction of projection will be normal to that plane just click on the preview make like that particular sketch being projected there so I’ll just click on okay and then if you can hide this I’ll just leave it like that the main thing is you should not get confused with that now the second part is just selecting this and go to the extrude option and give a extrude the direction should be on z-axis and you can give the direction the dimension as 15 and click okay so you got one particular extrude over there now I’ll just use the fill command I’ll fill this got filled over there I’ll use a filter man again and I’ll just in this portion too all right and let’s see what else just else’s to be done in this particular design and we’ll see that in the next part of the tutorial that’s it for this particular part and I hope you enjoyed and if you have any doubts any clarifications please feel free to comment on my video and okay know and you can always write to me at kit co dot producer at gmail.com see atia top we are all wrote user at gmail.com that’s all stay tuned thank you


Leave a Reply

Your email address will not be published. Required fields are marked *