48″ Mid Rise Automotive Scissor Lift

48″ Mid Rise Automotive Scissor Lift


hi I mean Gilmore with redline engineering and red line stands comm here to show you this mid-rise scissor lift slips got a lot of cool features to it and one of my favorite is the dolly here power unit dolly it’s kind of a combo and that you can use the power unit dolly to move the lift around which I’ll show you now it’s not easy with one guy because it’s very heavy but it can be done and you show you operating the lift now I’m going to roll roll the power unit over here to the wall and plug it in this lift weighs about a thousand pounds it’s an all steel construction with a powder coated finish you got two three-inch cylinders with a built in safety locking system runs on 110 volt electricity it’s got a lower dad height of about six inches and a maximum lifting height of about sixty inches when you use the included truck adapters that we’ll talk about here in just a second you notice you have a safety locking mechanism right here that will fall into the safety locks if you were to try and lower it right now without using the mechanical safety lock release so I’m going to raise this unit on up a little more okay now if I wanted to lower it all I would do is pull this lever on the power unit over here and as I pull this lever you’ll notice that the safety lock moves and so if I wanted to lower it right now into a safety lock I would release that push on the lever on the power unit and the safety lock would then engage and you’ll see it slide into place there and the lift stops this lift has got lifting arms that you’ll see here that pivot and slide front the rear probably slide front the rear may be ten inches or so and this is great for allowing you to tailor the the lift to be able to contact the the points of the frame on the vehicle right where you want to lift from this lift comes with three different sets of lifting feet the tallest that we have here the the tow truck adapter is in place right now so I wanted to switch out I would just pull out my rubber foot here slide this truck adapter off this is the short truck adapter that they give you slide your rubber foot into place in case you don’t need as much height and then they give you a low profile mounting foot you’ll see here thick rubber top slide it into place in case you’re trying to lift a car and not a pickup truck something like that you can see more of this lift at our web-site red line stands calm you can call us at nine oh one three five one four seven six four four a shipping quote thanks for taking the time to watch our video


Leave a Reply

Your email address will not be published. Required fields are marked *